Front Side Door Window Regulator Replacement (Power)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Power Door Window Regulator

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Position the door window as needed for service. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
1	Front Side Door Window Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Tape the window to the door frame to prevent it from moving. Loosen the 2 bolts that attach the window to the window regulator. Disconnect the electrical connector. Tighten 9 N.m (80 lb in)
2	Front Side Door Window Regulator Bolt (Qty: 3) Tighten 9 N.m (80 lb in)
3	Front Side Door Window Regulator Nut (Qty: 2) Tighten 9 N.m (80 lb in)
4	Front Side Door Window Regulator