LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Symptoms - Wiring Systems >> Notes

Symptoms - Wiring Systems: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The following steps must be completed before using the symptom tables.

  1. Perform the Diagnostic System Check - Vehicle (with HP2) , Diagnostic System Check - Vehicle (without HP2) before using the symptom tables in order to verify that all of the following are true:
    • There are no DTCs set.
    • The control modules can communicate via the serial data links.
  2. Review the system operation in order to familiarize yourself with the system functions. Refer to: