LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Wiring Systems And Power Management - Component Connector End Views - Mode Actuator Through Yaw Sensor) >> Component Connector End Views >> Speaker - Subwoofer (UQA or UQS)

Speaker - Subwoofer (UQA or UQS)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Speaker - Subwoofer (UQA or UQS) Connector End View
GM130637Courtesy of GENERAL MOTORS CORP.
Speaker- Subwoofer (UQA or UQS)

Pin Wire Circuit Function
A 0.8 L-GN/BK 1794 Left or Rear Subwoofer Speaker Output (-)
B 0.8 D-BU/WH 346 Left or Rear Subwoofer Speaker Output (+)
C 0.8 D-GN 1795 Right Subwoofer Speaker Output (+)
D 0.8 L-BU/BK 315 Right Subwoofer Speaker Output (-)
Connector Part Information
  • Harness Type: Floor Console
  • OEM Connector: 12064760
  • Service Connector: 12085208
  • Description: 4-Way F Metri-Pack 150 Series (BK)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 12085208
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: 15326030/2
  • Core/Insulation Crimp: E/A