LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Wiring Systems And Power Management - Component Connector End Views - Mode Actuator Through Yaw Sensor) >> Component Connector End Views >> Noise Compensation Microphone (STZ)

Noise Compensation Microphone (STZ)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Noise Compensation Microphone (STZ) Connector End View
GM35441Courtesy of GENERAL MOTORS CORP.
Noise Compensation Microphone (STZ)

Pin Wire Circuit Function
A 0.5 BARE 1489 Drain Wire
B 0.5 D-GN 1488 Noise Compensation Microphone Signal (+)
Connector Part Information
  • Harness Type: Floor Console
  • OEM Connector: 12089868
  • Service Connector: 12085481
  • Description: 2-Way M Metri-Pack 150 Series (BK)
Terminal Part Information
  • Terminated Lead: 13575462
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: E/C
scientia non olet · About LEMON Manuals