LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 313 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Disconnect Procedure

Disconnect Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS CORP.
    WARNING:

    Refer to Battery Disconnect Warning .

  1. Turn off all the lamps and accessories.
  2. Turn the ignition OFF.
  3. Open the hood.
  4. Loosen the negative cable nut (6).
  5. Remove the negative battery cable from the battery terminal.
  6. Reposition the negative battery cable away from the battery.
scientia non olet · About LEMON Manuals