LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Shroud Replacement (Without Electronic Tilt Steering)

Steering Column Shroud Replacement (Without Electronic Tilt Steering)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper & Lower Steering Column Shroud And Tilt Lever (Without Electronic Tilt Steering)
GM1700680Courtesy of GENERAL MOTORS CORP.
Steering Column Shroud Replacement (Without Electronic Tilt Steering)

Callout Component Name
1 Tilt Lever
Procedure 
Remove by pulling straight outwards.
2 Upper Steering Column Shroud
3 Lower Steering Column Shroud
CAUTION:

Refer to Fastener Caution .

Procedure

  1. If equipped, remove the 2 lower steering column shroud bolts.
  2. Install 2 lower steering column shroud bolts if damage exists to the steering column shroud locking features.

Tighten 
3 N.m (27 lb in)