Steering Column Shroud Replacement (With Electronic Tilt Steering)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Column Shroud (With Electronic Tilt Steering)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Lower Steering Column Shroud Bolt CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Lower Steering Column Shroud Procedure Disconnect any electrical connectors as needed. Disconnect the shift lever seal from the steering column lower trim cover.
3	Upper Steering Column Shroud Bolt Tighten 2 N.m (18 lb in)
4	Upper Steering Column Shroud Procedure Disconnect the shift lever seal from the steering column upper trim cover.