LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Heated Steering Wheel Control Switch

  1. Place the heated steering wheel control switch in the OFF position.
  2. Test for infinite resistance between terminal 2 and terminal 8.
    • If less than the specified value, replace the switch.
  3. Place the heated steering wheel control switch in the ON position.
  4. Test for less than 2 ohms between terminal 2 and terminal 8.
    • If greater than the specified value, replace the switch.
scientia non olet · About LEMON Manuals