LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Indicator Malfunction >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is ON and the heated steering wheel switch is pressed, the switch circuit is pulled to ground. The heat module monitors the switch circuit, and turns the steering wheel heat system ON or OFF when the circuit is grounded. The heat module supplies voltage to the indicator lamp when the system is on.

scientia non olet · About LEMON Manuals