LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning System Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Good And Bad Sealing Washer Positions
    GM818438Courtesy of GENERAL MOTORS CORP.
  1. Remove the seal washer from the A/C refrigerant component.
    2. IMPORTANT:

    Cap or tape the open A/C refrigerant components immediately to prevent system contamination.

  2. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    4. IMPORTANT:

    DO NOT reuse sealing washer.

  4. Discard the sealing washer.
scientia non olet · About LEMON Manuals