Balancing Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Before installing the compressor, the refrigerant oil will have to be fully drained.
- Add back the same quantity of polyalkylene glycol (PAG) oil as drained from the removed compressor.
Refer to the amount of refrigerant oil recorded during the compressor removal.
IMPORTANT:
The refrigerant oil in the A/C system must be balanced during compressor replacement.