LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Compressor Bracket Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. Refer to Air Conditioning Compressor Replacement (HP2) , Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92, LC9 and LMG) .
  2. Remove the A/C belt tensioner bolts.
  3. Remove the A/C belt tensioner.
    4. Fig 1: A/C Compressor Bracket Mounting Bolts
    GM363185Courtesy of GENERAL MOTORS CORP.
  4. Remove the A/C compressor bracket mounting bolts.
  5. Remove the A/C compressor bracket.
scientia non olet · About LEMON Manuals