LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Clutch Drive Plate Adjustment

Air Conditioning Clutch Drive Plate Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Measuring Air Gap Between Pulley & Drive Plate
    GM2073711Courtesy of GENERAL MOTORS CORP.
  1. Install the clutch plate assembly.
    2. NOTE:

    Ensure the drive plate does not drag against the pulley when the pulley is rotated.

  2. Measure the air gap between the pulley and the drive plate. Adjust the shims to achieve a 0.35-0.65 mm (0.014-0.026 in) air gap.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the clutch plate retaining bolt and tighten to 18 N.m (13 lb ft).
scientia non olet · About LEMON Manuals