Inflatable Restraint Seat Position Sensor Replacement (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inflatable Restraint Seat Position Sensor (with HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front driver seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
1	Driver Seat Position Sensor Rivet (Qty: 2) Procedure Drill out the old rivet. Use a new rivet for replacement.
2	Driver Seat Position Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure
Remove the front driver seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .

Driver Seat Position Sensor Rivet (Qty: 2)

Procedure

Drill out the old rivet.
Use a new rivet for replacement.

Driver Seat Position Sensor
Procedure
Disconnect the electrical connector.