Seat Belt Retractor Replacement - No. 1 Rear (Standard Wheelbase)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Belt Retractor - No. 1 Rear (Standard Wheelbase)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable roof rail SIR system. Refer to SIR Disabling and Enabling . Remove rear side door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Extended Wheelbase) , Rear Side Door Sill Trim Plate Replacement (Standard Wheelbase) . Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) , Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) , Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
1	Rear Seat Shoulder Belt Anchor Bolt CAUTION: Refer to Fastener Caution . Tighten 43 N.m (32 lb ft)
2	Rear Seat Shoulder Belt Guide
3	Rear Seat Shoulder Belt Retractor Bolt Tighten 43 N.m (32 lb ft)
4	Rear Seat Shoulder Belt Retractor Assembly