LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Compartment Door Opening Frame Replacement (Cadillac)

Instrument Panel Compartment Door Opening Frame Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Compartment Door Opening Frame (Cadillac)
GM1991033Courtesy of GENERAL MOTORS CORP.
Instrument Panel Compartment Door Opening Frame Replacement (Cadillac)

Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment door. Refer to Instrument Panel Compartment Door Replacement (Except Cadillac) , Instrument Panel Compartment Door Replacement (Cadillac) .
  2. Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (Except Cadillac) , Instrument Panel Outer Trim Cover Replacement (Cadillac) .
  3. Remove the instrument panel compartment access hole cover. Refer to Instrument Panel Compartment Access Hole Cover Replacement (Except Cadillac) , Instrument Panel Compartment Access Hole Cover Replacement (Cadillac) .
1 Instrument Panel Compartment Opening Frame Screw (Qty: 5)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Instrument Panel Compartment Opening Frame Assembly
Procedure 
When replacing the instrument panel compartment opening frame assembly, transfer all necessary components.
scientia non olet · About LEMON Manuals