LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Headlamp Switch Bezel Replacement (Except Cadillac)

Headlamp Switch Bezel Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Switch Bezel (Except Cadillac)
GM1996468Courtesy of GENERAL MOTORS CORP.
Headlamp Switch Bezel Replacement (Except Cadillac)

Callout Component Name
1 Headlamp Switch Plate Assembly

Procedure

  1. Use a flat bladed plastic trim tool in order to remove the trim plate from the instrument panel.
  2. Disconnect the electrical connections.
  3. When replacing the headlamp switch plate assembly, transfer all necessary components.