LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Headlamp Switch Bezel Replacement (Cadillac)

Headlamp Switch Bezel Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Switch Bezel (Cadillac)
GM1656573Courtesy of GENERAL MOTORS CORP.
Headlamp Switch Bezel Replacement (Cadillac)

Callout Component Name
1 Headlamp Switch Trim Plate Assembly
  1. Disconnect the electrical connectors.
  2. If replacing the trim plate, transfer the switches as needed.
2 Headlamp Switch Plate Retainer (Qty: 4)