Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Floor Console Cup Holder

Courtesy of GENERAL MOTORS CORP.

Open the cupholder assembly.
Remove the screws securing the door to the cupholder.

Fig 2: Front Floor Console Cup Holder Door

Courtesy of GENERAL MOTORS CORP.

Remove the door from the cupholder assembly.

Fig 3: Inserting Flat Bladed Tool Between Console Assembly And Cupholder

Courtesy of GENERAL MOTORS CORP.

Insert a flat bladed tool between the console assembly and the cupholder and release the retaining tab.

Fig 4: Front Floor Console And Cup Holder Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the cupholder from the console assembly.