Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Floor Console And Cup Holder Assembly

Courtesy of GENERAL MOTORS CORP.

Install the cupholder into the console assembly.

Fig 2: Front Floor Console Cup Holder Door

Courtesy of GENERAL MOTORS CORP.

Position the door to the cupholder assembly.

Fig 3: Front Floor Console Cup Holder

Courtesy of GENERAL MOTORS CORP.

CAUTION:

Refer to Fastener Caution .

Install the screws securing the cupholder door to the cupholder assembly. Tighten the screws to 2 N.m (18 lb in).