LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Armrest Hinge Replacement

Front Floor Console Armrest Hinge Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Floor Console Armrest Hinge
GM1785759Courtesy of GENERAL MOTORS CORP.
Front Floor Console Armrest Hinge Replacement

Callout Component Name
Preliminary Procedure 
Remove the Console Assembly. Refer to Front Floor Console Replacement (Except Cadillac) , Front Floor Console Replacement (Cadillac) .
1 Front Floor Console Armrest Inner Panel Screw (Qty: 8)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Front Floor Console Armrest Inner Panel
3 Front Floor Console Armrest to Hinge Screw (Qty: 4)
Tighten 
2 N.m (18 lb in)
4 Front Floor Console Armrest Assembly
5 Front Floor Console Compartment Assembly
Refer to Front Floor Console Compartment Replacement (Except Cadillac) .
6 Front Floor Console Armrest Hinge to Console Retainer Screw (Qty: 4)
Tighten 
2 N.m (18 lb in)
7 Front Floor Console Armrest Hinge Assembly