LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Folding Top Stowage Compartment Lid Replacement (Cadillac)

Folding Top Stowage Compartment Lid Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Folding Top Stowage Compartment Components
GM2314764Courtesy of GENERAL MOTORS CORP.
Folding Top Stowage Compartment Lid Replacement (Cadillac)

Callout Component Name
Preliminary Procedure 
Remove the front floor console armrest assembly. Refer to Front Floor Console Armrest Removal and Installation (Cadillac) .
1 Front Floor Console Compartment Door Latch Retainer
Procedure 
Use a flat bladed plastic trim tool and separate the door latch retainer from the folding top stowage compartment lid assembly.
2 Front Floor Console Compartment Door Panel Fasteners (Qty: 4)
CAUTION:

Refer to Fastener Caution .

3 Front Floor Console Compartment Door Panel Assembly
4 Folding Top Stowage Compartment Lid Outer Panel Assembly