Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Shoulder Belt Opening Bezel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat Shoulder Belt Opening Bezel Screw CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Rear Seat Shoulder Belt Opening Bezel Procedure Remove the seat belt anchor bolt and disengage the seat belt anchor from the seat frame by using a flat-bladed tool. Slide the bezel along the seat belt and remove with belt assembly.

Callout

Component Name

Rear Seat Shoulder Belt Opening Bezel Screw

CAUTION:

Refer to Fastener Caution .

Tighten
2 N.m (18 lb in)

Rear Seat Shoulder Belt Opening Bezel

Procedure

Remove the seat belt anchor bolt and disengage the seat belt anchor from the seat frame by using a flat-bladed tool.
Slide the bezel along the seat belt and remove with belt assembly.