LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Latch Replacement (Split Bench)

Rear Seat Latch Replacement (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Latch (Split Bench)
GM1708131Courtesy of GENERAL MOTORS CORP.
Rear Seat Latch Replacement (Split Bench)

Callout Component Name
1 Rear Seat Latch Cover Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Rear Seat Latch Cover
3 Rear Seat Latch Center Cover Bolt
Tighten 
2 N.m (18 lb in)
4 Rear Seat Latch Center Cover
5 Rear Seat Latch Bolts (Qty: 4)
Tighten 
9 N.m (80 lb in)
6 Rear Seat Latch
scientia non olet · About LEMON Manuals