Front Seat Armrest Lid Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Armrest Lid

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat armrest. Refer to Front Seat Armrest Replacement (AZ3) , Front Seat Armrest Replacement (without AZ3)
1	Front Seat Armrest Inner Lid Fasteners (Qty: 4) Procedure Open the armrest lid and remove fasteners.
2	Front Seat Armrest Inner Lid Procedure Pull upward to disengage the inner lid retaining tabs from the armrest lid.
3	Front Seat Armrest Lid Hinge Fasteners (Qty: 4) Procedure The lid hinge fasteners are concealed between hinge and inner lid/bin.
4	Front Seat Armrest Lid Procedure The Inner lid and lid hinge are not serviceable components. When replacing the armrest lid with a new unit, transfer components as necessary.