3rd Row Seat Cushion Cover and Pad Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 3rd Row Seat Cushion Cover And Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) . Remove the rear seat cushion finish covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat No. 2 Cushion Cover TIP: Disconnect the j-channel from the seat cushion frame and remove the cushion cover and pad as an assembly.
2	Rear Seat No. 2 Cushion Pad TIP: Pull the seat cushion cover off the pad to disengage the retainers.

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) .
Remove the rear seat cushion finish covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .

Rear Seat No. 2 Cushion Cover
TIP: Disconnect the j-channel from the seat cushion frame and remove the cushion cover and pad as an assembly.

Rear Seat No. 2 Cushion Pad
TIP: Pull the seat cushion cover off the pad to disengage the retainers.