LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> 3rd Row Seat Back Latch Cable Replacement

3rd Row Seat Back Latch Cable Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Back Latch Cable Assembly
GM1683933Courtesy of GENERAL MOTORS CORP.
3rd Row Seat Back Latch Cable Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) .
  2. Remove the rear seat cushion trim covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1 Rear Seat #2 Back Cable Assembly