3rd Row Seat Back Hinge Finish Cover Replacement (AW2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 3rd Row Seat Back Hinge Finish Cover (AW2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat No. 2 Back Cushion Hinge Finish Cover Screw CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Rear Seat No. 2 Back Cushion Hinge Finish Cover Tilt the opposite seat forward to allow access to the inner finish cover. Pull away from the seat to disengage the integral retainers.