LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Interior Trim And Interior Paneling) >> Repair Instructions >> Removable Midgate Hinge Finish Cover Replacement (SUT)

Removable Midgate Hinge Finish Cover Replacement (SUT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removable Midgate Hinge Finish Cover
GM1709267Courtesy of GENERAL MOTORS CORP.
Removable Midgate Hinge Finish Cover Replacement (SUT)

Callout Component Name
1 Midgate Hinge Finish Cover
  1. Tilt rear seat backs forward in order to gain access to hinge cover.
  2. Pull upward on hinge cover to disengage clips.
2 Midgate Hinge Finish Cover Clip (Qty: 2)
scientia non olet · About LEMON Manuals