LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Interior Trim And Interior Paneling) >> Repair Instructions >> Rear Floor Trim Plate Replacement (Avalanche/Escalade EXT)

Rear Floor Trim Plate Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Floor Trim Plate (Avalanche/Escalade EXT)
GM1702735Courtesy of GENERAL MOTORS CORP.
Rear Floor Trim Plate Replacement (Avalanche/Escalade EXT)

Callout Component Name

Preliminary Procedures

  1. Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) , Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) , Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
  2. Remove midgate hinges. Refer to Midgate Hinge Replacement .
1 Rear Floor Trim Plate Assembly
2 Rear Floor Trim Plate Retainers (Qty: 3)