LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Bumpers And Fascias) >> Repair Instructions >> Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Fascia Step Pad (All Utility, Cadillac ESV)
GM1700028Courtesy of GENERAL MOTORS CORP.
Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

Callout Component Name
Preliminary Procedure 
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) , Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) .
1 Rear Fascia Step Pad
TIP:  Remove the chrome trim piece and use a trim panel removal tool to gently pry the pad upwards. It may be necessary to reach under the backside of the fascia and squeeze the pad clips to assist in the release.