Front Side Door Wiring Conduit Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Wiring Conduit

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .
1	Electrical Connector Procedure Mark the location and the color of the wires to the electrical socket before removing the wires. Disconnect the door wiring harness electrical connector from the body harness. Remove the wiring harness wiring one at a time from the conduit. Remove the wiring harness from the rubber conduit.
2	Conduit Grommet

Callout

Component Name

Preliminary Procedure
Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .

Electrical Connector

Procedure

Mark the location and the color of the wires to the electrical socket before removing the wires.
Disconnect the door wiring harness electrical connector from the body harness.
Remove the wiring harness wiring one at a time from the conduit.
Remove the wiring harness from the rubber conduit.

Conduit Grommet