LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Endgate Weatherstrip Replacement

Endgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Endgate Weatherstrip
GM1817768Courtesy of GENERAL MOTORS CORP.
Endgate Weatherstrip Replacement

Callout Component Name
1 Endgate Weatherstrip
  1. Seat and align the weatherstrip carrier end left to top of flange left side.
  2. Seat and align the weatherstrip carrier end right to top of flange right side.
  3. Load the weatherstrip center flush with the center of the flange.
  4. Stuff and set remaining weatherstrip working downward and inward toward the center.