LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Lighting System) >> Repair Instructions >> Parking and Turn Signal Lamp Bulb Replacement (Escalade)

Parking and Turn Signal Lamp Bulb Replacement (Escalade)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Turn Signal Lamp Bulb And Socket
GM1767117Courtesy of GENERAL MOTORS CORP.
Parking and Turn Signal Lamp Bulb Replacement (Escalade)

Callout Component Name

Preliminary Procedures

  1. Remove the front lower bumper filler from the side the bulb is being serviced from. Refer to Front Bumper Filler Replacement (Z71) , Front Bumper Filler Replacement (All Utility, Avalanche, Cadillac EXT) .
  2. Rotate the bulb socket counterclockwise in order to remove.
1 Front Park, Turn Signal Lamp Socket
2 Front Park, Turn Signal Lamp Bulb
TIP:  Pull the bulb straight from the socket.