Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Back Body Opening Upper Applique Bolt | 10 N.m | 89 lb in |
| Endgate Assist Handle Bolt | 9 N.m | 80 lb in |
| Endgate Rear Spoiler Nut | 10 N.m | 89 lb in |
| Front Bumper Fascia Grille Screw-Chevrolet Tahoe Two-mode Hybrid | 1.5 N.m | 13 lb in |
| Front Wheel Opening Flare Screw | 2 N.m | 18 lb in |
| Front Fender Lower Rear Molding Assembly Screw-Chevrolet Tahoe Two-mode Hybrid | 2 N.m | 18 lb in |
| Front Radiator Grille Screw-Yukon, Chevrolet | 1.5 N.m | 13 lb in |
| Liftgate Center Applique Assembly Nut | 6 N.m | 53 lb in |
| Quarter Panel Upper Applique Screw | 2 N.m | 18 lb in |
| Radiator Grille Emblem/Nameplate Nut-Chevrolet | 1.5 N.m | 13 lb in |
| Rear Applique Nut | 9 N.m | 80 lb in |
| Rear Applique Screw | 2 N.m | 18 lb in |
| Rear Wheel Opening Flare Screw | 2 N.m | 18 lb in |