LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Exterior Trim) >> Repair Instructions >> Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Grille Emblem/Nameplate (PLATINUM)
GM2039436Courtesy of GENERAL MOTORS CORP.
Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

Callout Component Name
Preliminary Procedure 
Remove the front bumper fascia assembly. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , Front Bumper Fascia Replacement (Z71) .
1 Radiator Grille Emblem Assembly Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
Hand tighten the screws.
2 Radiator Grille Emblem Assembly