Hood Front Molding Replacement (GMC Denali XL)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Front Molding (GMC Denali)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open the hood in order to access and remove the front hood molding.
1	Hood Front Molding Assembly Release the integral retainers from the hood. Upon installation, align the left hand center retainer first into the hood as indicated. Gently secure the remaining retainers working from left to right across the entire hood front molding.