LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Exterior Trim) >> Repair Instructions >> Cargo Box Stowage Box Handle Replacement (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Endgate Assist Handle And Retaining Bolts
    GM1708947Courtesy of GENERAL MOTORS CORP.
  1. Install the assist handle (2) to the endgate cap.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the bolts (1) to the assist handle in order to attach the assist handle to the endgate cap. Tighten the bolts to 9 N.m (80 lb in).
  3. Close the cargo box stowage lid.
scientia non olet · About LEMON Manuals