LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Tires And Wheels) >> Repair Instructions >> Tire Repair >> Internal Inspection

Internal Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Marking Tire Puncture Location
    GM1407419Courtesy of GENERAL MOTORS CORP.
  1. Spread the beads and mark the puncture with a tire crayon.
  2. Inspect the inner tire for any signs of internal damage.
  3. Remove the puncturing object, noting the direction of the penetration.
  4. Probe the injury with a blunt awl in order to determine the extent and direction of the injury.
  5. Remove any loose foreign material from the injury.
  6. Punctures exceeding 6.35 mm (1/4 in) should not be repaired.
scientia non olet · About LEMON Manuals