LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Tires And Wheels) >> Repair Instructions >> Tire Repair >> Clean the Injury Channel

Clean the Injury Channel

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reaming Puncture Channel
    GM1407455Courtesy of GENERAL MOTORS CORP.
  1. Use a proper hand reamer, carbide cutter or drill bit to ream the puncture channel from the inside of the tire in order to clean the injury.
  2. Remove steel wires protruding above the liner surface to prevent damage to the repair unit.
  3. Consult your repair material supplier for recommended reaming tool(s).
scientia non olet · About LEMON Manuals