LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Front Drive Axle) >> Repair Instructions >> Differential Carrier Assembly Hole Plug Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle .
  2. Turn the front wheels to the left in order to provide access to the left side of the differential carrier assembly.
    3. Fig 1: Differential Carrier Assembly & Hole Plug
    GM847066Courtesy of GENERAL MOTORS CORP.
  3. Remove the differential carrier assembly hole plug from the differential carrier assembly.
scientia non olet · About LEMON Manuals