LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Wiring Systems And Power Management - Splice Pack And In-Line Harness Connector End Views) >> Inline Harness Connector End Views >> X112 Engine Harness to Camshaft Position Sensor Jumper Harness (except 6.0L)

X112 Engine Harness to Camshaft Position Sensor Jumper Harness (except 6.0L)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM684807Courtesy of GENERAL MOTORS CORP.
GM655690Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 12110293
  • Service: 12118025
  • Description: 3-Way F Metri-Pack 150 Series Sealed (BK)
 Connector Part Information 
  • OEM: 12129615
  • Service: 15305889
  • Description: 3-Way M Metri-Pack 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal: 12048074/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 35616-2A (GY)
 Terminal Part Information 
  • Terminal: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
X112 Engine Harness to Camshaft Position Sensor Jumper Harness (except 6.0L)

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.35 D-BU 6259 5-Volt Reference A 0.35 RD 6259 5-Volt Reference
B 0.35 BN 6266 Low Reference B 0.35 PK/BK 6266 Low Reference
C 0.35 D-BU/WH 6265 Camshaft Position (CMP) Sensor Signal C 0.35 BN/WH 6265 Camshaft Position (CMP) Sensor Signal
scientia non olet · About LEMON Manuals