LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Water Leaks) >> Diagnostic Information and Procedures >> Water Hose Test

Water Hose Test

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Performing Water Hose Test
GM95572Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use a water hose without the nozzle attached.
  1. Have an assistant inside of the vehicle in order to locate the leak.
  2. Begin testing at the base of the window or the windshield.
  3. Slowly move the hose upward and across the top of the vehicle.
scientia non olet · About LEMON Manuals