LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Rear Suspension System) >> Repair Instructions >> Spring Shackle Replacement (2500) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Spring Hanger Bracket, Nuts & Bolts
    GM361791Courtesy of GENERAL MOTORS CORP.
  1. Install the shackle to the spring.
    2. NOTE: Refer to Fastener Notice .
  2. Install the shackle nut and bolt to the spring.

    Tighten:  Tighten the shackle bolt to 95 N.m (70 lb ft).

  3. Install the leaf spring assembly to the vehicle. Refer to Leaf Spring Replacement .
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals