LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Rear Suspension System) >> Repair Instructions >> Spring Jounce Bumper Replacement (1500) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Spring Bumper
    GM793294Courtesy of GENERAL MOTORS CORP.
  1. Position the jounce bumper to the bracket.
  2. Press the jounce bumper into the bracket until fully seated.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals