Propeller Shaft Runout Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Application	Front Runout		Center Runout		Rear Runout		Stub Shaft Runout
Application	Metric	English	Metric	English	Metric	English	Metric	English
1 Piece Propeller Shaft - Guideline	1.17 mm	0.046 in	1.27 mm	0.050 in	1.40 mm	0.055 in	-	-
1 Piece Aluminum Graphite Propeller Shaft - Guideline	1.17 mm	0.046 in	-	-	1.40 mm	0.055 in	-	-
2 Piece System Front Propeller Shaft with Slip Yoke - Guideline	0.76 mm	0.030 in	0.76 mm	0.030 in	0.71 mm	0.028 in	-	-
2 Piece System Front Propeller Shaft with Stub Shaft - Guideline	0.76 mm	0.030 in	0.76 mm	0.030 in	-	-	0.13 mm	0.005 in
2 Piece System Rear Propeller Shaft with Slip Yoke - Guideline	0.71 mm	0.028 in	0.76 mm	0.030 in	0.89 mm	0.035 in	-	-
2 Piece System Rear Propeller Shaft with Stub Shaft - Guideline	-	-	0.76 mm	0.030 in	0.89 mm	0.035 in	0.13 mm	0.005 in
These guidelines apply only to propeller systems with 2 or 3 U-joints.