LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Vibration Symptoms Diagnosis And Correction) >> Repair Instructions >> Tire and Wheel Assembly Balancing - Off Vehicle >> Tire and Wheel Assembly Balancing Guidelines >> Notes

Tire and Wheel Assembly Balancing Guidelines: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Tire and wheel assemblies which exhibit excessive runout can produce vibrations even if the assemblies are balanced.
It is strongly recommended that the tire and wheel assembly runout be measured and corrected if necessary BEFORE the assemblies are balanced.

If the runout of the tire and wheel assemblies has not yet been measured, refer to Tire and Wheel Assembly Runout Measurement - Off Vehicle  before proceeding.

There are 2 types of tire and wheel balance:

scientia non olet · About LEMON Manuals