LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Vibration Symptoms Diagnosis And Correction) >> Description and Operation >> Vibration Theory and Terminology >> Cycle

Vibration Theory and Terminology: Cycle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Powertrain Vibration Cycles
GM95588Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 1st Cycle
2 2nd Cycle
3 3rd Cycle
4 Time
Fig 2: Identifying Vibration Cycles In Powertrain Components
GM95589Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Spindle
2 Pinion Nose

The word cycle comes from the same root as the word circle. A circle begins and ends at the same point, as thus, so does a cycle. All vibrations consist of repetitive cycles.