LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Engine Mechanical - Hybrid (Hp2) 6.0L (LFA)) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Housing Removal

Crankshaft Rear Oil Seal Housing Removal

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear Housing, Gasket and Seal
    GM1552544Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear oil seal housing bolts (517).
  2. Remove the housing (518) and gasket (519).
  3. Remove the rear oil seal (141).
scientia non olet · About LEMON Manuals