Engine Block - Left/Right Side Views
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Engine Block - Left/Right Side Views
| Hole | Thread Size | Insert | Drill | Counterbore Tool | Tap | Driver | Drill Depth - Maximum mm (in) | Tap Depth - Maximum mm (in) |
|---|---|---|---|---|---|---|---|---|
| J 42385- | ||||||||
| 1 | M8 x 1.25 | 210 | 206 | 207 | 208 | 209 | 22.5 (0.885) | 17.5 (0.688) |
| 2 | M8 x 1.25 | 210 | 206 | 207 | 208 | 209 | 28.5 (1.122) | 23.0 (0.905) |
| 3 | M8 x 1.25 | 210 | 206 | 207 | 208 | 209 | 21.5 (0.846) | 16.0 (0.629) |
| 4 | M10 x 1.25 | 215 | 211 | 212 | 213 | 214 | 29.0 (1.141) | 23.0 (0.905) |
| 5 | M10 x 1.5 | 215 | 211 | 212 | 213 | 214 | 27.0 (1.062) | 21.5 (0.846) |
| 6 | M16 x 1.5 | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| 7 | M11 x 2.0 | 108 | 105 | N/A | 106 | 107 | 69.0 (2.72) | 60.0 (2.36) |
| 8 | M28 x 1.25 | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Bolt hole 7 has a 30 mm (1.18 in) counterbore included in the 69.0 mm (2.72 in) drill depth. Use sleeve J 42385-315 with the drill and tap. | ||||||||